Product: PS48V-5A
Technical Specification
Input Specification : | |
Supply Voltage | 100 to 270V AC (L-N) / 127 to 370V DC |
Frequency Range | 50 / 60Hz |
Power Factor | > 0.95 @ Full Load |
Current Consumption | 2.7A@100V AC, 1.2A@230V AC 220V DC, < 1.2A |
Efficiency (TYP.) | >93%@230V AC |
Start UP time | <2 sec@230V AC (Full Load) |
Output Specification : | |
Nominal DC Voltage | 48V DC |
Output Voltage | 48V - 56V DC |
Output Current | 5A at 48V; 4.28A at 56V |
Ripple & noise | <1% of V out |
Line Regulation | ±0.5% |
Load Regulation | ±1% |
Hold UP Time | >13ms at 24V @ 100 /230V AC (Full Load) |
Protection Parameters: | |
Input Fuse | 4A-250V AC Internal |
Output Over Load | 110% to 140% of rated output Current protection Protection Type : hiccup mode;recover automatically after fault condition is removed |
Output Short Circuit | Hiccup mode when output is shorted;Recovers automatically after fault condition is removed. |
Output Over Voltage | SMPS Latches off if output voltage 60V DC ± 1V DC |
Over Temperature | Power supply shuts down when the temperature goes above specified limit; |
Turns on automatically after temperature goes back to Normal operating conditions. | |
Isolation between Input and Output : | 2.5 KV |
Physical : | |
Mounting Type | Din Rail Mount |
Size | 125 (H) x 55 (W) x 135 (D) |
Material | Polycarbonate (PC) |
Environmental: | |
Working Temperature | -25°C to 50°C * De-rate output power at 3w/°C above +50°C Ambient |
Storage Temperature | -40°C to 85°C |
Relative Humidity | 95% RH Non-condensing |
Application
Product: PS24-10APower 240WInput Voltage : 100-270V AC / 127 to 370V DCOutput Voltage : 24V DCEfficiency ... Continue