Product: MPD-192
Technical Specification
INPUT: | |
Voltage AC | |
Direct Voltage AC | 30 to 300V(L - N) 50 to 520V(L - L) |
Burden | < 0.2VA |
Current AC | |
Primary CT Ratio | 5 to 6000 Amp selectable |
Secondary Current AC | 0.1 to 5 Amp |
Burden | < 0.2VA |
Overload | Up to 6A continuous |
Frequency | 45.0 to 65.0 Hz |
DISPLAY AND KEYS: | |
Display | 3 Digit, 3 Line 7 Seg 0.56”, RED LED |
Keys | Scroll, SET, RST, INC, DEC |
DIMENSION: | |
Size (mm) | 96 (H) X 96 (W) X 54 (D) mm |
Panel Cutout (mm) | 92 (H) X 92 (W) mm |
Network Selection | 3 Phase - 4 Wire,3 Phase - 3 Wire |
TRIP SETTING: | |
Under Current | 0.00 to CTR |
Over Current | 0.00 to CTR |
Under Voltage | 50 to 520V For 3Ø - 3W 30 to 300V For 3Ø - 4W |
Over Voltage | 50 to 550V For 3Ø - 3W 30 to 330V For 3Ø - 4W |
Over / Under Frequency | 45.0 to 65.0 Hz |
Short Circut | 1 - 9 Scale |
Lock Rotor Point | 0.5 to 9.0 Scale |
Unbalance | 5 - 60% |
TIME PARAMETER: | |
Power On Delay | 0 to 99 Sec |
Initial Time Delay | 0 to 99 Sec |
Trip Delay Time(Voltage, Current, Frequency, SSP, Unbalance) | 0 to 999 Sec |
Scrolling Time | 1 to 99 Sec |
Reset Time | 0 to 99 Sec |
OUTPUT SPECIFICATION: | |
Relay | 2 Nos |
Relay Type | 1st Relay ( NO - C - NC ) 2nd Relay ( NO - C ) |
Rating | 1st Relay 10Amp, 230V AC (Resistive Load) 2nd Relay 5 Amp (With Simultaneous Actuation) |
AUXILIARY SUPPLY: | |
Supply Voltage | 100 to 270V AC, 50Hz |
Power Consumption | 4VA @ 230 AC MAX |
ENVIRONMENTAL CONDITION: | |
Working Temperature | 0 to 55°C |
Storage Temperature | 0 to 55°C |
Relative Humidity | 95 % RH Non-Condensing |
Protection Level (As Per request) | IP-65 (Front side As per IS/IEC 60529 : 2001) |
Application
Product Variant
Part Code | Voltage Input | Ampere Input | Other Input | Supply |
MPD-192-E3-N0 | 30 to 300V AC (L-N), 50 to 520V AC (L-L) | 60mA to 5A AC CT Selectable, CT Selectable up to 6000/5 |
| 100-270V AC/DC |
MPD-192-E2-N0 | 30 to 300V AC (L-N), 50 to 520V AC (L-L) | 60mA to 5A AC CT Selectable, CT Selectable up to 6000/5 |
| 50-550V AC |
MPD-19EL-E3-N0 | 30 to 300V AC (L-N), 50 to 520V AC (L-L) | 60mA to 5A AC CT Selectable, CT Selectable up to 6000/5 | ELR CBCT | 100-270V AC/DC |
MPD-192-E3-N7 | 30 to 300V AC (L-N), 50 to 520V AC (L-L) | Fixed Multispan 30A- 3 Ph CT Module |
| 100-270V AC/DC |
MPD-192-E3-N6 | 30 to 300V AC (L-N), 50 to 520V AC (L-L) | Fixed Multispan 60A- 3 Ph CT Module |
| 100-270V AC/DC |
MPD-192-E3-N8 | 30 to 300V AC (L-N), 50 to 520V AC (L-L) | Fixed Multispan 125A- 3 Ph CT Module |
| 100-270V AC/DC |
MPD-19EF-E3-N0 | 30 to 300V AC (L-N), 50 to 520V AC (L-L) | 60mA to 5A AC CT Selectable, CT Selectable up to 6000/5 | EFR CBCT | 100-270V AC/DC |
MPD-192-M1-E3-N0 | 30 to 300V AC (L-N), 50 to 520V AC (L-L) | 60mA to 5A AC CT Selectable, CT Selectable up to 6000/5 |
| 100-270V AC/DC |
Product: MPD-1523 Line – 3 Digit Display for Easy to Use and Understand 3 Phase Value3 Phase 3 Wire / 4 Wire... Continue