Product: PS12-5A-P
Technical Specification
Input Specification : | |
Supply Voltage | 100 to 270V AC±10%,(L-N) |
Frequency Range | 50 / 60Hz |
AC Current (TYP.) | 1.1A@100V AC, 0.49A@270V AC |
Efficiency (TYP.) | >86%@230V AC |
Start UP time | <1 sec@230V AC & <3 sec@100VAC (Full Load) |
Output Specification : | |
Output Voltage | 12V - 14V DC |
Output Current | 5A at 12V ; 4.2A at 14V DC |
Ripple & noise | <1% of V out |
Line & Load Regulation | ±1% |
Hold UP Time | <60ms at 230V AC & >15ms at 100V AC (Full Load) |
Protection Parameters: | |
Input Fuse | 3.15A-250V AC Internal |
Output Over Load | 110% to 120% of rated Output Current protection Protection Type :Hiccup mode;recover automatically after fault condition is removed |
Output Short Circuit | Hiccup mode when output is shorted;Recovers automatically after fault condition is removed. |
Output Over Voltage | SMPS Latches off if output voltage Exceeds the specified output voltage limit |
Over Temperature | Power supply shuts down when the temperature goes above specified limit; |
Turns on automatically after temperature goes back to Normal operating conditions. | |
Isolation between Input and Output : | 2.5 KV |
Physical : | |
Mounting Type | Din Rail Mount |
Size | 90 x 45 x 84mm |
Material | Polycarbonate (PC) |
Environmental: | |
Working Temperature | -25°C to 50°C * De-rate output power at 3w/°C above +50°C Ambient |
Storage Temperature | -40°C to 85°C |
Relative Humidity | 95% RH Non-condensing |
Applicaition
Product: PS24-2.5APower 60WInput Voltage : 100-270V ACOutput Voltage : 24V DCEfficiency : 89% @230V ACMateri... Continue